Darex 4300 Large Drill Attachment Bedienungsanleitung PDF herunterladen

Left Hand Drill Attachment

1/16” through 1/2” ( 2.5 - 20 mm)

(DAREX Part # 4300)

Installation and Operating Instructions

Installation

1 Replace the alignment fixture on top of the grinder

with the new LEFT / RIGHT hand alignment fixture.

(This fixture is used for both left and right hand

drills.)

2 Unscrew the wing nut and remove the standard

swing fixture assembly. Install the left hand swing fix-

ture, set at the angle required and tighten the wing

nut

Operating Instructions

1. To align the drill, rotate the chuck counterclockwise so

the cutting lips touch the pawls - use the orange

markings for the left hand drill setting. ( To increase

relief angle setting, locate the chuck arrow to the

right of the point angle arrow on the clamping band.)

2. Sharpen the drill as is done normally rotating the

chuck clockwise. The cam grinding action is

reversed, so the sharpening will feel different when

using the left hand fixture.

Splitting

Left Hand Drills

DAREX M-5

Drill Sharpener

Setting the point splitter:

1 Loosen chuck holder by moving handle "A" to the

left, see figure 1. Swing the chuck holder all the way

counterclockwise. Then tighten the chuck holder

handle. Rotate the cross feed knob "B", see figure

2, to position the center of the drill in line with the

Left Edge of the wheel. Use feed knob "C" to feed

for desired depth of split.

2. Splitting the point will always require that you inter-

sect the chisel line on the tip of the drill. To do this

correctly on a left hand drill instead of pointing the

chisel line straight down or parallel to the side of the

wheel, rotate the drill so the chisel edge points down

and towards the wheel and is ground away in the

splitting process. (See fig. 2)

Figure 2

Figure 1

Inhaltsverzeichnis

Seite 1 - Setting the point splitter:

Left Hand Drill Attachment1/16” through 1/2” ( 2.5 - 20 mm) (DAREX Part # 4300)Installation and Operating InstructionsInstallation1 Replace the align

Kommentare zu diesen Handbüchern

Keine Kommentare

Darex 4300 Large Drill Attachment Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Elektrowerkzeuge Darex 4300 Large Drill Attachment herunter. Darex 4300 Large Drill Attachment User Manual [en] [fr] [it] [pl] [de] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Darex 4300 Large Drill Attachment